The AXILOG is a state-of-the-art vibration monitoring system designed to quantify the load and determine the risk of damage on buildings and other structures.
The AXILOG II system is easy to operate, providing real-time measurements of vibration levels in accordance with BS, SBR or DIN guidelines with the advantage of remote monitoring. It provides simultaneous readings of object velocity in the X, Y and Z directions, which can be presented in a variety of formats and printed with site annotations.
Multiple alarm levels can be programmed into the system, providing the operator with an early warning in the event of pre-set levels being exceeded. The automated reporting function and significantly improved battery life makes this product ideal for long-term monitoring.
A lightweight and highly accurate system, the AXILOG II is supplied with a two year calibration certificate and rugged carry case.
Download the AXILOG II product data sheet
James Fisher Testing Services is the exclusive agent for the AXILOG II vibration monitoring system in the United Kingdom. For more information on the practical uses of this product, please visit the AXILOG II website.
Benefits of the AXILOG II vibration monitoring system:
- Real-time remote monitoring
- Built in modem as standard
- Multiple alarm notifications for important events
- Automatically generates reports for easy long-term monitoring
- Rugged lightweight system
- Up to 3 months internal battery life
- Built in GPS sensor to record location
- Free software updates
- Easy to operate
- Full equipment training available
- Testconsult complete test package available
All of our equipment is fully calibrated to UK national standards.
AXILOG II system specifications | |
Measurements | |
Velocity direction | X, Y, Z |
Velocity range | 0 to 50mm/s - 0.8 to 100Hz |
Velocity resolution | 0.01mm/s |
Sensor type | Geophone |
Signal processing method | Digital filter |
Dominant frequency determination | FFT |
GPS location sensor | GPS receiver, in sensor housing |
GPS location accuracy | 10m CEP |
Sensor tilt | Digital spirit level, in sensor housing |
Sensor tilt accuracy | ±0.1o |
Data logging settings | |
Logging interval time | 2 to 120 seconds |
Trigger level (minimum logging level) | 0.01 to 50mm/s |
Applicable standard | SBR-A, SBR-B, DIN45669B, BS5528-2, BS7385-2 |
Memory configuration | Circular or linear |
Alarm settings | |
Number of alarm levels | Two |
Alarm level curve | Absolute value, SBR / DIN / BS curves or user curve |
Frequency dependent curves | ALL SBR / DIN / BS curves are integrated |
Alarm message type | Electrical contact, email and / or SMS, contact server |
Number of messages per alarm | Three contacts with two email addresses and two SMS numbers each |
Online features | Contact remote server if an alarm occurs |
Online functionality | |
Management | Status, alarms and event overview or each AXILOG system |
Real-time capabilities | Graphs updated including spectrum every two seconds |
Alarm logging on screen and in event log | |
Status overview - logging on / off, battery condition, error status | |
Data acquisition | Read / erase memory |
Read / erase event log | |
Set logging parameters | |
Set modem schedule | |
Control | Start / stop logging either manual or with time schedule |
Alarms triggered by absolute values, reference standard curves or user curves | |
Monitoring type - either BS, DIN or SBR | |
Alarm action - either send e-mail of SMS | |
Set event messages and send by email or SMS | |
Language settings | English, Dutch and German |
Display | 2 x LCD backlit displays for measurements and for settings |
Battery | Lithium-ion 35 Ah capacity |
Battery charge | Mains or car battery |
Battery charge time | 12 hours (after full discharge) |
Connections | Mini USB / Alarm / Charger / Sensor / External antenna |
Modem | Mini SIM (2FF), GPRS/3G network, internal antenna and optional external antenna |
Environmental protection | IP65 (logger and sensor) |
Temperature operating range | -10oC to +50oC |
Temperature storage range | -20oC to +60oC |
Send email, SMS or contact the server at the following events:
- Primary alarm
- Secondary alarm
- Power ON
- Battery empty
- Charger connected / disconnected
- GPS obtained
- Sensor disconnected
- Sensor shock
- IP obtained
- Registration started / stopped
- Server connection
- Memory almost full / completely full
- GSM access failure
- Email send failure
- Server connect failure
The AXILOG software enables automatic read-out and reporting directly from the AXILOG unit or remotely.
Data can be presented in a number of formats including:
- Peak particle velocity vs. time
- Peak particle velocity vs. frequency - with BS, SBR and DIN standards overlay
- Frequency vs. time
- Time vs. velocity - histogram of event duration
How the AXILOG II works:
- Set the times, actions and desired report layout per AXILOG system
- Set the monitoring period (start and end time)
- Set the time at which the AXILOG must contact your PC
- As soon as the AXILOG contacts the PC, the data is downloaded
- As soon as the download ends, the report is generated